VIC-20 8k/16k Cartridge
Custom PCB cartridge for the Commodore VIC-20
The PCB is configurable for 8 x 8Kb, or 4 x 16Kb ROM’S and is supplied with a blank W27C512 EPROM (Which can be programmed with a suitable programmer like the TL866)
The following ROM’s are supported:
- 27C64
- 27C128
- 27C256
- 27C512 (And W27C512)
Setup
- Solder the 8k/16k jumper depending on which ROM you have loaded.
- Solder address lines A13, A14, A15 to select the ROM location to load.
- Solder Lower/Upper memory locations (See attachment for configuration)
If you want the jumper pre-configured please let me know when purchasing otherwise none of jumpers will be soldered.
